George L. Wilson & Co., Inc. offers a variety of products that will help seal and protect your concrete investment. Call your sales representative for more specific details.
Saltguard WB
Deep-penetration water and salt barrier
Saltguard WB penetrates more deeply than conventional water- or solvent-based water repellents. Saltguard WB is a water-based, ready-to-use, VOC-compliant silane/siloxane water repellent and chloride screen for the protection of concrete and masonry.
Low-odor and alkaline-stable makes Saltguard WB ideal for field or in-plant application to concrete and most masonry.
- Treated surfaces “breathe” – doesn’t trap moisture.
- Effective protection against de-icing salts and salt air.
- Penetrates to produce long-lasting protection on vertical or horizontal surfaces.
MasterProtect H 400
Water-based 40% silane penetrating sealer (Formerly: Enviroseal 40)
MasterProtect H 400 provides long-lasting protection against freeze/thaw cycles, the moisture and chloride intrusion that harsh winter weather brings. MasterProtect H 400 is 40% silane which makes it ideal for traffic-bearing surfaces and does not alter surface appearance.
- Breathable to allow interior moisture to escape without damaging sealer
- One component for ease of application
MasterProtect H 1000
Formerly called Hydrozo 100
MasterProtect H 1100 is a clear low viscosity liquid, with a very low molecular size which ensures effective impregnation of concrete and masonry surfaces of 3-8 mm penetration into the pore structure. This forms a permanently bonded hydrophobic lining on the pore-walls of the substrate.
MasterProtect H 1100 does not change the appearance of the base concrete after absorption and which makes it ideal for architectural concrete elements.
MasterProtect H 1100 is also available with a red fugitive dye that provides an easy identification of the treated areas. The color of the dye will disappear in approximately 1 week depending on the number of coats applied and the amount of UV light.
MasterProtect H 1100 is recommended for application to most of the cementitious, masonry and mineral substrates above ground, not subject to hydrostatic pressure.