G.L.Wilson LOGO

GEORGE L. WILSON & CO., INC.

Euclid LOGO

The Euclid Chemical Company is a global supplier of quality admixture, fiber and construction products for the concrete, masonry, repair, decorative and construction markets.

Construction Products

Pre-packaged materials for new concrete construction and the repair, protection and waterproofing of existing concrete structures.

Horizontal Repair

Underlayments, overlayments and patching compounds in self leveling, trowel, or form and pour applications.

Vertical/Overhead Repair

Patching compounds for vertical and overhead applications.

Bonding Agents & Adhesives

An extensive line of epoxy adhesives and other polymer bonding agents in low and high modulus variations with multiple viscosities to ensure proper bonding.


Duralprep A.C.

DURALPREP A.C. is a three-component bonding agent and anti-corrosion coating for reinforcing steel. It is a pre-proportioned kit that contains a water-based epoxy, combined with portland cement that can be used as a bonding agent for placing fresh concrete and repair mortars to existing concrete substrates.

DURALPREP A.C. contains a corrosion inhibitor which protects reinforcement when used as an anti-corrosion coating for steel. DURALPREP A.C. has a long open time, is non-flammable, VOC compliant, and does not form a water vapor barrier after cure.

Features/Benefits

Applications

Packaging

DURALPREP A.C. is packaged in 3.75 gal kits and cases of 1 gal. units (2 units per case)

Duralprep Part A Duralprep Part B Duralprep Part C

See Dural Prep in use

More Info ...

Top of Page



Dural 452 MV

DURAL 452 MV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, medium viscosity epoxy resin is the perfect solution for bonding new, plastic concrete to existing concrete slabs and steel.

Features/Benefits
Applications
Specifications/Compliances
Packaging

DURAL 452 MV is packaged in 2 gal (7.6 L), 4 gal (15 L) and 10 gal (38 L) units. The mix ratio is 1:1 by volume

More Info ...

Top of Page



Dural Fast Set Gel

DURAL FAST SET GEL is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a quick turn-around. DURAL FAST SET GEL can be used in temperatures as low as 35°F (2°C) and rising.

Features/Benefits
Applications
Specifications/Compliances
Packaging

Dural Fast Set Gel is packaged in 4 gal (15 L) and 10 gal (38 L) units and cases of 12/22 oz. (650 ml) and 24/10 oz. (300 ml) cartridges

More Info ...

Top of Page






Dural Fast Set LV

DURAL FAST SET LV is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates. DURAL FAST SET LV can be used in temperatures as low as 35°F (2°C) and rising.

Features/Benefits
Applications
Packaging

DURAL FAST SET LV is packaged in 4 gal and 10 gal units and cases of 12/22 oz. and 24/10 oz. cartridges.

More Info ...

Top of Page



Diamond Clear 350

DIAMOND CLEAR is a state-of-the-art curing and sealing compound, specially designed to provide a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure. DIAMOND CLEAR is particularly well suited for exterior architectural concrete where membrane yellowing is undesirable.


Features/Benefits
Applications
Specifications/Compliances
Packaging

Diamond Clear is packaged in 55 gal (208 L) drums and 5 gal (18.9 L) pails.

More Info ...

Top of Page




Speed Crete Red Line

Speed Crete Red Line is a fast setting, cement based concrete and masonry patching compound which when combined with the correct amount of water, undergoes a chemical "hyper hydration" and produces a stable, low permeability, cementitious matrix.

Features/Benefits
Applications
Packaging

Speed Crete Red Line is packaged in 50 lb (22.7 kg) poly-lined bags, and 50 lb (22.7 kg) pails

More Info ...

Top of Page




Tammspatch II

TAMMSPATCH II is a two component polymer reinforced, cementitious mortar and underlayment.

Features/Benefits
Applications
Specifications/Compliances
Packaging

TAMMSPATCH II Part A (powder) is packaged in a 45 lb (20.4 kg) bag. Part B (liquid) is packaged in a 1 gal (3.7 L) jug. A mixed unit will yield approximately 0.42 ft³ (0.011m³).

More Info ...

Top of Page





Tamms Thin Patch

TAMMS THIN PATCH is a polymer modified, cement based compound that is formulated for patching and repairing concrete and masonry.

Features/Benefits
Packaging

25 lb. plastic pails, and 50 lb. poly lined bags

Applications

More Info ...

Top of Page





Euco QWIKstitch

EUCO QWIKstitch is a two-component hybrid urethane repair liquid used to mend cracks in concrete, repair spalled joints and patch damaged or uneven concrete surfaces. EUCO QWIKstitch is an ultra-low viscosity material formulated to penetrate deep into cracks and quickly fill pop-outs in concrete surfaces. Its fast cure time makes quick work of repair jobs: floors repaired with EUCO QWIKstitch can be opened to foot traffic in just 10 minutes and are ready for heavy traffic in one hour.

Applications
Features/Benefits
Packaging

EUCO QWIKstitch is packaged in cases of 12/22 oz dual cartridges and cases of 12/9 oz single-tube cartridges with static mixers and retaining nuts included. EUCO QWIKstitch is also available in 2 gal bulk units consisting of 1 gal Part A and 1 gal Part B.

More Info ...

Top of Page




Euco QWIKjoint UVR

EUCO QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKjoint UVR resists fading from ultraviolet light greater than any existing product on the market. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. EUCO QWIKjoint UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKjoint UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges.

Features/Benefits
Applications
Specifications/Compliances
Packaging

EUCO QWIKjoint UVR is a two-component product packaged in 22 oz side-by-side cartridges (12/case) and 10 gal kits for all 33 standard colors. The mix ratio for all packaging sizes is 1:1.

More Info ...

Top of Page